top of page

Calabria
Where Performance Meets Precision

Calabria 1500
Double Chopping Grass Silage Machine
45 - 60kW
POWER REQUIREMENT (MIN - MAX)
WORK WIDTH
1500 MM
PTO SHAFT RPM
540 RPM
Take a Close Look
Discover the Calabria 1500 from all sides with its 360-degree animation.



Mowing the Withered Grass
Withered grass is a healthy and important feed source for your animals. Unlike its competitors, Calabria® can easily pick up withered grass from the ground, break it into pieces and shape it thanks to its extra fine chopping feature.
Fine Shredding Size
In Calabria®, specially shaped, improved rotor and flywheel blades were used based on flow analysis. Now it is very easy to make the chopping length according to the desired dimensions.
Adjustable Format Height
The row-independent silage machine, which is compatible with different tractors, offers the options of being connected to the front, back and side of the tractor; It offers full efficiency use with 540, 750 and 1000 rpm transmission options.

Patented Rotor System
While designing the patented rotor system in Calabria®, conventional systems were deviated from. The rotor system with specially designed blades mows the grass on the ground with minimum loss. The chopped grass is pre-chopped and transmitted to the flywheel before passing to the flywheel system.

Patentli Volan Sistemi
Thanks to its widened blowing pallets and patented blade system, Calabria® has achieved a much finer chopping capacity compared to its competitors, with a faster blowing capacity.

Automatic Knife Sharpening
By using a cast body, the system is free from vibrations and perfect blade sharpening is achieved. The blade sharpening mechanism allows adjustment parallel to the chopper flywheel thanks to its special adjustment system. In this way, the entire sharp surface of the blade is sharpened.

Special Design Bearing
Calabria Plus uses Çelikel designed 20,000 series bearings. This bearing is adapted to the flywheel, rotor, shaft and helical bearings, providing maximum safety in vibrating work areas.

Independent Hydraulics
Calabria Plus'da kullanılan hem traktör bağımlı hem de traktör bağımsız hidrolik sistem ile tüm kullanıcıların ihtiyaçlarına uygun bir hidrolik sistem opsiyonu sunar.
Technical Specifications
You can review Calabria's technical specifications in the table below.
ÖZELLİKLER | DOUBLE CHOP 1500 | DOUBLE CHOP 1800 | DOUBLE CHOP 2100 |
---|---|---|---|
GÜÇ GEREKSİNİMİ (MIN – MAX) | 45 - 60 kW | 60 - 80 kW | 80 - 100 kW |
İŞ GENİŞLİĞİ | 1500 mm | 1800 | 2100 |
ROTOR BIÇAK SAYISI | 36 adet | 48 adet | 56 adet |
KIYICI DİSK BIÇAK SAYISI | 10 adet | 10 adet | 10 adet |
ATICI PALET SAYISI | 10 adet | 10 adet | 10 adet |
TEKER ÖLÇÜSÜ | 165X70XR13 | 165X70XR13 | 165X70XR13 |
ROTOR DEVİR SAYISI | 2250 rpm | 2250 rpm | 2250 rpm |
KIYICI DİSK DEVİR SAYISI | 1620 rpm | 1620 rpm | 1620 rpm |
AĞIRLIK | 925 kg | 975 kg | 1045 kg |
KUYRUK MİLİ DEVİR SAYISI | 540 rpm | 540 rpm | 540 rpm |
İŞ KAPASİTESİ* | 20 ton / saat | 25 ton / saat | 30 ton / saat |
GENİŞLİK (İŞ KONUMU) | 2535 mm | 2835 mm | 3135 mm |
YÜKSEKLIK (İŞ KONUMU) | 3700 mm | 3700 mm | 3700 mm |
UZUNLUK (İŞ KONUMU) | 2400 mm | 2400 mm | 2400 mm |
GENİŞLİK (YOL KONUMU) | 2540 mm | 2840 mm | 3140 mm |
YÜKSEKLİK (YOL KONUMU) | 2355 mm | 2355 mm | 2355 mm |
UZUNLUK (YOL KONUMU) | 3170 mm | 3170 mm | 3170 mm |
KIYIM BOYUTU (AYARLANABİLİR) | 20 - 70 mm | 20 - 70 mm | 20 - 70 mm |
BİÇME YÜKSEKLİĞİ (AYARLANABİLİR) | 50-150 mm | 50-150 mm | 50-150 mm |
Video
You can view videos of Calabria.
Photograph
Calabria'nın fotoğraflarını inceleyebilirsiniz.









bottom of page